[riot-devel] Question about AT86rf231 port for SAMr21 xpro board

Hauke Petersen hauke.petersen at fu-berlin.de
Mon Oct 20 10:21:03 CEST 2014


Hi Maxence,

I actually havn't looked into the Radios yet. @Thomas, can you answer this?

Cheers,
Hauke

On 19.10.2014 17:38, Maxence Chotard wrote:
> Hi Hauke,
>
> Thank you for your quick answer ! I am already working on the port of the
> at86rf233 for Sam R21 but I think  there are also some register addresses
> which differ from at86rff231 ? Could you confirm that or am I wrong ?
>
> Cheers,
> Maxence
>
> -----Message d'origine-----
> De : devel [mailto:devel-bounces at riot-os.org] De la part de
> devel-request at riot-os.org
> Envoyé : vendredi 17 octobre 2014 12:00
> À : devel at riot-os.org
> Objet : devel Digest, Vol 20, Issue 11
>
> Send devel mailing list submissions to
> 	devel at riot-os.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.riot-os.org/mailman/listinfo/devel
> or, via email, send a message with subject or body 'help' to
> 	devel-request at riot-os.org
>
> You can reach the person managing the list at
> 	devel-owner at riot-os.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of devel digest..."
>
>
> Today's Topics:
>
>     1. Question about AT86rf231 port for SAMr21 xpro board
>        (Maxence Chotard)
>     2. Re: Question about AT86rf231 port for SAMr21 xpro board
>        (Hauke Petersen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 16 Oct 2014 14:21:07 +0200
> From: "Maxence Chotard" <maxence.chotard at xsoen.com>
> To: <devel at riot-os.org>
> Subject: [riot-devel] Question about AT86rf231 port for SAMr21 xpro
> 	board
> Message-ID: <000001cfe93b$b0af8970$120e9c50$@xsoen.com>
> Content-Type: text/plain;	charset="iso-8859-1"
>
> Hello everyone,
>
> I'm working on the RIOT port for SAMr21 xpro board and I would like to know
> when the port for AT86rf231 will be done to adapt it for the At86rf233 which
> is used on SAM r21 xpro board.
>
> Cheers,
> Maxence
>
>
>
> -----Message d'origine-----
> De?: devel [mailto:devel-bounces at riot-os.org] De la part de
> devel-request at riot-os.org
> Envoy??: mardi 14 octobre 2014 19:26
> ??: devel at riot-os.org
> Objet?: devel Digest, Vol 20, Issue 9
>
> Send devel mailing list submissions to
> 	devel at riot-os.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.riot-os.org/mailman/listinfo/devel
> or, via email, send a message with subject or body 'help' to
> 	devel-request at riot-os.org
>
> You can reach the person managing the list at
> 	devel-owner at riot-os.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of devel digest..."
>
>
> Today's Topics:
>
>     1. Re: Port of RIOT on Samr21 xpro board (Thomas Eichinger)
>     2. Re: Port of RIOT on Samr21 xpro board (Joakim Gebart)
>     3. Re: Port of RIOT on Samr21 xpro board (Akshay Mishra)
>     4. Re: Port of RIOT on Samr21 xpro board (Thomas Eichinger)
>     5. Question about hwtimer_now implementation.. (Michael Burg)
>     6. Re: Question about hwtimer_now implementation.. (Ludwig Ortmann)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 14 Oct 2014 16:06:15 +0200
> From: Thomas Eichinger <thomas.eichinger1 at gmail.com>
> To: Baptiste Clenet <bapclenet at gmail.com>
> Cc: devel at riot-os.org
> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
> Message-ID: <031B35CD-C29D-4BB6-A3A8-5A84FB8B7240 at gmail.com>
> Content-Type: text/plain; charset="windows-1252"
>
> Hi Babtiste,
>
> great to hear you are interested in RIOT and welcome!
>
> I put the developer list in CC, hope that?s ok.
>
> >From the core developers and maintainers currently nobody is actively
> working on this port because we?re focusing on another platform (iot-lab_M3)
> for an event in the first week of November. After this the samr21 will get
> more attention again. AFAIK there are some more people working on this,
> maybe those could reply to this briefly with their current topic?
>
> Feel free to choose a module, maybe let us know on one channel or an other
> which one you chose?
>
> As a side note, I?m currently refactoring the at86rf231 radio driver which
> also the samr21 will profit from since its using a very similar device.
>
> Best, Thomas
>
>
> On 14 Oct 2014, at 14:58, Baptiste Clenet <bapclenet at gmail.com> wrote:
>> I have seen this thread https://github.com/RIOT-OS/RIOT/issues/1646
>> which
> has been closed since the 9th of September and also this documentation:
> https://github.com/RIOT-OS/RIOT/wiki/Board%3A-Samr21-xpro.
>> I would like to know if the two webpages are up to date concerning the
> port and who works on which part?
>> According to your answer, I will select a part of the implementation
>> and
> work on it.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.riot-os.org/pipermail/devel/attachments/20141014/f0a2bb9a/atta
> chment-0001.html>
>
> ------------------------------
>
> Message: 2
> Date: Tue, 14 Oct 2014 16:19:37 +0200
> From: Joakim Gebart <joakim.gebart at eistec.se>
> To: RIOT OS kernel developers <devel at riot-os.org>
> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
> Message-ID:
> 	<CAOy=vakjcSiyeHxSJPQq5rJQOOWSWHCwJG2hSHLM6pBVC4kpmQ at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> On Tue, Oct 14, 2014 at 4:06 PM, Thomas Eichinger
> <thomas.eichinger1 at gmail.com> wrote:
>> Hi Babtiste,
>>
>> great to hear you are interested in RIOT and welcome!
>>
>> I put the developer list in CC, hope that?s ok.
>>
>>  From the core developers and maintainers currently nobody is actively
>> working on this port because we?re focusing on another platform
>> (iot-lab_M3) for an event in the first week of November. After this
>> the samr21 will get more attention again. AFAIK there are some more
>> people
> working on this, maybe those could reply to this briefly with their current
> topic?
>> Feel free to choose a module, maybe let us know on one channel or an
>> other
> which one you chose?
>> As a side note, I?m currently refactoring the at86rf231 radio driver
>> which also the samr21 will profit from since its using a very similar
> device.
>
> Do you have any time plan for the AT86RF refactoring?
> I was going to implement the platform specific parts of that driver for my
> Mulle platform port but I think I will hold off on that until the
> refactoring is completed to save myself some extra work.
>
> Best regards,
> Joakim
>
>> Best, Thomas
>>
>>
>> On 14 Oct 2014, at 14:58, Baptiste Clenet <bapclenet at gmail.com> wrote:
>>
>> I have seen this thread https://github.com/RIOT-OS/RIOT/issues/1646
>> which
> has been closed since the 9th of September and also this documentation:
> https://github.com/RIOT-OS/RIOT/wiki/Board%3A-Samr21-xpro.
>> I would like to know if the two webpages are up to date concerning the
> port and who works on which part?
>> According to your answer, I will select a part of the implementation
>> and
> work on it.
>>
>>
>> _______________________________________________
>> devel mailing list
>> devel at riot-os.org
>> http://lists.riot-os.org/mailman/listinfo/devel
>>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 14 Oct 2014 20:14:28 +0530
> From: Akshay Mishra <akshay at dspworks.in>
> To: RIOT OS kernel developers <devel at riot-os.org>
> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
> Message-ID:
> 	<CABSY_ZsAJPfx3djweb6o7i0b6tCExBrxh5bQ94_EKBqD1mSdWA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> On 14 October 2014 19:36, Thomas Eichinger <thomas.eichinger1 at gmail.com>
> wrote:
>
>> Hi Babtiste,
>>
>> great to hear you are interested in RIOT and welcome!
>>
>> I put the developer list in CC, hope that?s ok.
>>
>>  From the core developers and maintainers currently nobody is actively
>> working on this port because we?re focusing on another platform
>> (iot-lab_M3) for an event in the first week of November. After this
>> the samr21 will get more attention again. AFAIK there are some more
>> people working on this, maybe those could reply to this briefly with
>> their current topic?
>>
>>
> We are also starting on the SAMD21 -- count us in on the effort. as of now
> exploring RIOT and have the SAMD21-XPRO blinking some LEDs.
>
> -Akshay
>
>
>
>> Feel free to choose a module, maybe let us know on one channel or an
>> other which one you chose?
>>
>> As a side note, I?m currently refactoring the at86rf231 radio driver
>> which also the samr21 will profit from since its using a very similar
>> device.
>>
>> Best, Thomas
>>
>>
>> On 14 Oct 2014, at 14:58, Baptiste Clenet <bapclenet at gmail.com> wrote:
>>
>> I have seen this thread https://github.com/RIOT-OS/RIOT/issues/1646
>> which has been closed since the 9th of September and also this
> documentation:
>> https://github.com/RIOT-OS/RIOT/wiki/Board%3A-Samr21-xpro.
>>
>> I would like to know if the two webpages are up to date concerning the
>> port and who works on which part?
>> According to your answer, I will select a part of the implementation
>> and work on it.
>>
>>
>>
>> _______________________________________________
>> devel mailing list
>> devel at riot-os.org
>> http://lists.riot-os.org/mailman/listinfo/devel
>>
>>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> <http://lists.riot-os.org/pipermail/devel/attachments/20141014/1aeaa097/atta
> chment-0001.html>
>
> ------------------------------
>
> Message: 4
> Date: Tue, 14 Oct 2014 16:53:26 +0200
> From: Thomas Eichinger <thomas.eichinger at fu-berlin.de>
> To: RIOT OS kernel developers <devel at riot-os.org>
> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
> Message-ID: <60175B00-BEDE-4B4F-AB28-E43ED74E2B96 at fu-berlin.de>
> Content-Type: text/plain; charset=windows-1252
>
> Hi Joakim,
>
> On 14 Oct 2014, at 16:19, Joakim Gebart <joakim.gebart at eistec.se> wrote:
>> Do you have any time plan for the AT86RF refactoring?
>> I was going to implement the platform specific parts of that driver
>> for my Mulle platform port but I think I will hold off on that until
>> the refactoring is completed to save myself some extra work.
> Actually I?m almost done, it will take advantage of the extended operation
> mode features (e.g. hardware address filtering, auto-ack, ?) and I adopted
> the new netdev interface. I?m doing some last testing and cleanup today and
> probably tomorrow.
>
> The platform specific part is reduced to a very minimum already, you only
> have to define the SPI device and GPIOs. (compare
> boards/iot-lab_M3/include/board.h)
> Don?t think this will change anymore.
>
> Best, Thomas
>
>
>
> ------------------------------
>
> Message: 5
> Date: Tue, 14 Oct 2014 13:17:44 -0400
> From: Michael Burg <mike at burg.me>
> To: devel at riot-os.org
> Subject: [riot-devel] Question about hwtimer_now implementation..
> Message-ID: <543D5AB8.5000506 at burg.me>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>
> Hello,
>
> I'm trying to port RIOT to a FRDM-KL46Z board (ARM cortex m0-plus based),
> and having a some trouble understanding how the hardware timer code is
> supposed to be implemented.
>
> Specially, what should be hwarch_now()/hwtimer_arch_now be returning?
>
> Is it supposed to be the ticks from boot, or the current value of the timer
> from when hwtimer_arch_set*() called?
>
> Thanks,
>
> -- Michael
>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Tue, 14 Oct 2014 19:26:58 +0200
> From: Ludwig Ortmann <ludwig.ortmann at fu-berlin.de>
> To: RIOT OS kernel developers <devel at riot-os.org>
> Subject: Re: [riot-devel] Question about hwtimer_now implementation..
> Message-ID: <20141014172658.GA20759 at seahorse.zedat.fu-berlin.de>
> Content-Type: text/plain; charset=us-ascii
>
> Hi Michael,
>
> On Tue, Oct 14, 2014 at 01:17:44PM -0400, Michael Burg wrote:
>> Hello,
>>
>> I'm trying to port RIOT to a FRDM-KL46Z board (ARM cortex m0-plus
>> based), and having a some trouble understanding how the hardware timer
>> code is supposed to be implemented.
>>
>> Specially, what should be hwarch_now()/hwtimer_arch_now be returning?
>>
>> Is it supposed to be the ticks from boot, or the current value of the
>> timer from when hwtimer_arch_set*() called?
> hwtimer_arch_now should return the "system time".
> As the timer may overflow, this is the tick count since boot in the first
> iteration.
>
> In case you didn't notice, there's documentation in core/include/hwtimer.h
> which says:
>
>      "The current tick count of the hardware timer"
>
> Did you see this and found it inconclusive?
> In that case would try to improve the documentation, so don't hesitate to
> "yes" here ;)
>
> Cheers, Ludwig
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> devel mailing list
> devel at riot-os.org
> http://lists.riot-os.org/mailman/listinfo/devel
>
>
> ------------------------------
>
> End of devel Digest, Vol 20, Issue 9
> ************************************
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 16 Oct 2014 15:30:23 +0200
> From: Hauke Petersen <hauke.petersen at fu-berlin.de>
> To: RIOT OS kernel developers <devel at riot-os.org>
> Subject: Re: [riot-devel] Question about AT86rf231 port for SAMr21
> 	xpro board
> Message-ID: <543FC86F.6020607 at fu-berlin.de>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> Hi Maxence,
>
> the AT86rf321 driver is well on it's way, it should be in a good state by
> next week. You can however already use it in the current state with the
> SAMr21-xpro, the missing link are the low-level SPI and GPIO drivers for the
> cpu. If you implement these, you should be ready to go!
>
> Cheers,
> Hauke
>
>
> On 16.10.2014 14:21, Maxence Chotard wrote:
>> Hello everyone,
>>
>> I'm working on the RIOT port for SAMr21 xpro board and I would like to
>> know when the port for AT86rf231 will be done to adapt it for the
>> At86rf233 which is used on SAM r21 xpro board.
>>
>> Cheers,
>> Maxence
>>
>>
>>
>> -----Message d'origine-----
>> De : devel [mailto:devel-bounces at riot-os.org] De la part de
>> devel-request at riot-os.org Envoy? : mardi 14 octobre 2014 19:26 ? :
>> devel at riot-os.org Objet : devel Digest, Vol 20, Issue 9
>>
>> Send devel mailing list submissions to
>> 	devel at riot-os.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> 	http://lists.riot-os.org/mailman/listinfo/devel
>> or, via email, send a message with subject or body 'help' to
>> 	devel-request at riot-os.org
>>
>> You can reach the person managing the list at
>> 	devel-owner at riot-os.org
>>
>> When replying, please edit your Subject line so it is more specific
>> than
>> "Re: Contents of devel digest..."
>>
>>
>> Today's Topics:
>>
>>      1. Re: Port of RIOT on Samr21 xpro board (Thomas Eichinger)
>>      2. Re: Port of RIOT on Samr21 xpro board (Joakim Gebart)
>>      3. Re: Port of RIOT on Samr21 xpro board (Akshay Mishra)
>>      4. Re: Port of RIOT on Samr21 xpro board (Thomas Eichinger)
>>      5. Question about hwtimer_now implementation.. (Michael Burg)
>>      6. Re: Question about hwtimer_now implementation.. (Ludwig
>> Ortmann)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Tue, 14 Oct 2014 16:06:15 +0200
>> From: Thomas Eichinger <thomas.eichinger1 at gmail.com>
>> To: Baptiste Clenet <bapclenet at gmail.com>
>> Cc: devel at riot-os.org
>> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
>> Message-ID: <031B35CD-C29D-4BB6-A3A8-5A84FB8B7240 at gmail.com>
>> Content-Type: text/plain; charset="windows-1252"
>>
>> Hi Babtiste,
>>
>> great to hear you are interested in RIOT and welcome!
>>
>> I put the developer list in CC, hope that?s ok.
>>
>>   From the core developers and maintainers currently nobody is actively
>> working on this port because we?re focusing on another platform
>> (iot-lab_M3) for an event in the first week of November. After this
>> the samr21 will get more attention again. AFAIK there are some more
>> people working on this, maybe those could reply to this briefly with their
> current topic?
>> Feel free to choose a module, maybe let us know on one channel or an
>> other which one you chose?
>>
>> As a side note, I?m currently refactoring the at86rf231 radio driver
>> which also the samr21 will profit from since its using a very similar
> device.
>> Best, Thomas
>>
>>
>> On 14 Oct 2014, at 14:58, Baptiste Clenet <bapclenet at gmail.com> wrote:
>>> I have seen this thread https://github.com/RIOT-OS/RIOT/issues/1646
>>> which
>> has been closed since the 9th of September and also this documentation:
>> https://github.com/RIOT-OS/RIOT/wiki/Board%3A-Samr21-xpro.
>>> I would like to know if the two webpages are up to date concerning
>>> the
>> port and who works on which part?
>>> According to your answer, I will select a part of the implementation
>>> and
>> work on it.
>>
>> -------------- next part -------------- An HTML attachment was
>> scrubbed...
>> URL:
>> <http://lists.riot-os.org/pipermail/devel/attachments/20141014/f0a2bb9
>> a/atta
>> chment-0001.html>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Tue, 14 Oct 2014 16:19:37 +0200
>> From: Joakim Gebart <joakim.gebart at eistec.se>
>> To: RIOT OS kernel developers <devel at riot-os.org>
>> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
>> Message-ID:
>> 	<CAOy=vakjcSiyeHxSJPQq5rJQOOWSWHCwJG2hSHLM6pBVC4kpmQ at mail.gmail.com>
>> Content-Type: text/plain; charset=UTF-8
>>
>> On Tue, Oct 14, 2014 at 4:06 PM, Thomas Eichinger
>> <thomas.eichinger1 at gmail.com> wrote:
>>> Hi Babtiste,
>>>
>>> great to hear you are interested in RIOT and welcome!
>>>
>>> I put the developer list in CC, hope that?s ok.
>>>
>>>   From the core developers and maintainers currently nobody is
>>> actively working on this port because we?re focusing on another
>>> platform
>>> (iot-lab_M3) for an event in the first week of November. After this
>>> the samr21 will get more attention again. AFAIK there are some more
>>> people
>> working on this, maybe those could reply to this briefly with their
>> current topic?
>>> Feel free to choose a module, maybe let us know on one channel or an
>>> other
>> which one you chose?
>>> As a side note, I?m currently refactoring the at86rf231 radio driver
>>> which also the samr21 will profit from since its using a very similar
>> device.
>>
>> Do you have any time plan for the AT86RF refactoring?
>> I was going to implement the platform specific parts of that driver
>> for my Mulle platform port but I think I will hold off on that until
>> the refactoring is completed to save myself some extra work.
>>
>> Best regards,
>> Joakim
>>
>>> Best, Thomas
>>>
>>>
>>> On 14 Oct 2014, at 14:58, Baptiste Clenet <bapclenet at gmail.com> wrote:
>>>
>>> I have seen this thread https://github.com/RIOT-OS/RIOT/issues/1646
>>> which
>> has been closed since the 9th of September and also this documentation:
>> https://github.com/RIOT-OS/RIOT/wiki/Board%3A-Samr21-xpro.
>>> I would like to know if the two webpages are up to date concerning
>>> the
>> port and who works on which part?
>>> According to your answer, I will select a part of the implementation
>>> and
>> work on it.
>>>
>>> _______________________________________________
>>> devel mailing list
>>> devel at riot-os.org
>>> http://lists.riot-os.org/mailman/listinfo/devel
>>>
>> ------------------------------
>>
>> Message: 3
>> Date: Tue, 14 Oct 2014 20:14:28 +0530
>> From: Akshay Mishra <akshay at dspworks.in>
>> To: RIOT OS kernel developers <devel at riot-os.org>
>> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
>> Message-ID:
>> 	<CABSY_ZsAJPfx3djweb6o7i0b6tCExBrxh5bQ94_EKBqD1mSdWA at mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> On 14 October 2014 19:36, Thomas Eichinger
>> <thomas.eichinger1 at gmail.com>
>> wrote:
>>
>>> Hi Babtiste,
>>>
>>> great to hear you are interested in RIOT and welcome!
>>>
>>> I put the developer list in CC, hope that?s ok.
>>>
>>>   From the core developers and maintainers currently nobody is
>>> actively working on this port because we?re focusing on another
>>> platform
>>> (iot-lab_M3) for an event in the first week of November. After this
>>> the samr21 will get more attention again. AFAIK there are some more
>>> people working on this, maybe those could reply to this briefly with
>>> their current topic?
>>>
>>>
>> We are also starting on the SAMD21 -- count us in on the effort. as of
>> now exploring RIOT and have the SAMD21-XPRO blinking some LEDs.
>>
>> -Akshay
>>
>>
>>
>>> Feel free to choose a module, maybe let us know on one channel or an
>>> other which one you chose?
>>>
>>> As a side note, I?m currently refactoring the at86rf231 radio driver
>>> which also the samr21 will profit from since its using a very similar
>>> device.
>>>
>>> Best, Thomas
>>>
>>>
>>> On 14 Oct 2014, at 14:58, Baptiste Clenet <bapclenet at gmail.com> wrote:
>>>
>>> I have seen this thread https://github.com/RIOT-OS/RIOT/issues/1646
>>> which has been closed since the 9th of September and also this
>> documentation:
>>> https://github.com/RIOT-OS/RIOT/wiki/Board%3A-Samr21-xpro.
>>>
>>> I would like to know if the two webpages are up to date concerning
>>> the port and who works on which part?
>>> According to your answer, I will select a part of the implementation
>>> and work on it.
>>>
>>>
>>>
>>> _______________________________________________
>>> devel mailing list
>>> devel at riot-os.org
>>> http://lists.riot-os.org/mailman/listinfo/devel
>>>
>>>
>> -------------- next part -------------- An HTML attachment was
>> scrubbed...
>> URL:
>> <http://lists.riot-os.org/pipermail/devel/attachments/20141014/1aeaa09
>> 7/atta
>> chment-0001.html>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Tue, 14 Oct 2014 16:53:26 +0200
>> From: Thomas Eichinger <thomas.eichinger at fu-berlin.de>
>> To: RIOT OS kernel developers <devel at riot-os.org>
>> Subject: Re: [riot-devel] Port of RIOT on Samr21 xpro board
>> Message-ID: <60175B00-BEDE-4B4F-AB28-E43ED74E2B96 at fu-berlin.de>
>> Content-Type: text/plain; charset=windows-1252
>>
>> Hi Joakim,
>>
>> On 14 Oct 2014, at 16:19, Joakim Gebart <joakim.gebart at eistec.se> wrote:
>>> Do you have any time plan for the AT86RF refactoring?
>>> I was going to implement the platform specific parts of that driver
>>> for my Mulle platform port but I think I will hold off on that until
>>> the refactoring is completed to save myself some extra work.
>> Actually I?m almost done, it will take advantage of the extended
>> operation mode features (e.g. hardware address filtering, auto-ack, ?)
>> and I adopted the new netdev interface. I?m doing some last testing
>> and cleanup today and probably tomorrow.
>>
>> The platform specific part is reduced to a very minimum already, you
>> only have to define the SPI device and GPIOs. (compare
>> boards/iot-lab_M3/include/board.h)
>> Don?t think this will change anymore.
>>
>> Best, Thomas
>>
>>
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Tue, 14 Oct 2014 13:17:44 -0400
>> From: Michael Burg <mike at burg.me>
>> To: devel at riot-os.org
>> Subject: [riot-devel] Question about hwtimer_now implementation..
>> Message-ID: <543D5AB8.5000506 at burg.me>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>>
>>
>> Hello,
>>
>> I'm trying to port RIOT to a FRDM-KL46Z board (ARM cortex m0-plus
>> based), and having a some trouble understanding how the hardware timer
>> code is supposed to be implemented.
>>
>> Specially, what should be hwarch_now()/hwtimer_arch_now be returning?
>>
>> Is it supposed to be the ticks from boot, or the current value of the
>> timer from when hwtimer_arch_set*() called?
>>
>> Thanks,
>>
>> -- Michael
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 6
>> Date: Tue, 14 Oct 2014 19:26:58 +0200
>> From: Ludwig Ortmann <ludwig.ortmann at fu-berlin.de>
>> To: RIOT OS kernel developers <devel at riot-os.org>
>> Subject: Re: [riot-devel] Question about hwtimer_now implementation..
>> Message-ID: <20141014172658.GA20759 at seahorse.zedat.fu-berlin.de>
>> Content-Type: text/plain; charset=us-ascii
>>
>> Hi Michael,
>>
>> On Tue, Oct 14, 2014 at 01:17:44PM -0400, Michael Burg wrote:
>>> Hello,
>>>
>>> I'm trying to port RIOT to a FRDM-KL46Z board (ARM cortex m0-plus
>>> based), and having a some trouble understanding how the hardware
>>> timer code is supposed to be implemented.
>>>
>>> Specially, what should be hwarch_now()/hwtimer_arch_now be returning?
>>>
>>> Is it supposed to be the ticks from boot, or the current value of the
>>> timer from when hwtimer_arch_set*() called?
>> hwtimer_arch_now should return the "system time".
>> As the timer may overflow, this is the tick count since boot in the
>> first iteration.
>>
>> In case you didn't notice, there's documentation in
>> core/include/hwtimer.h which says:
>>
>>       "The current tick count of the hardware timer"
>>
>> Did you see this and found it inconclusive?
>> In that case would try to improve the documentation, so don't hesitate
>> to "yes" here ;)
>>
>> Cheers, Ludwig
>>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>> devel mailing list
>> devel at riot-os.org
>> http://lists.riot-os.org/mailman/listinfo/devel
>>
>>
>> ------------------------------
>>
>> End of devel Digest, Vol 20, Issue 9
>> ************************************
>>
>> _______________________________________________
>> devel mailing list
>> devel at riot-os.org
>> http://lists.riot-os.org/mailman/listinfo/devel
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> devel mailing list
> devel at riot-os.org
> http://lists.riot-os.org/mailman/listinfo/devel
>
>
> ------------------------------
>
> End of devel Digest, Vol 20, Issue 11
> *************************************
>
> _______________________________________________
> devel mailing list
> devel at riot-os.org
> http://lists.riot-os.org/mailman/listinfo/devel



More information about the devel mailing list