[riot-devel] Raspberry & 6LoWPAN HowTo outdated

smlng s at mlng.net
Fri Dec 9 09:39:41 CET 2016

Hi Tomek,

please have a look at these guides [1], they should get you started with the RPi + Openlabs.

In case anything is missing or unclear, please make open issue there.


[1]: https://github.com/riot-makers/wpan-raspbian/wiki

> Am 09.12.2016 um 07:01 schrieb Tomek Jokii <tomek.jokii at gmail.com>:
> Hi,
> does someone plan to update following HowTo:
> https://github.com/RIOT-OS/RIOT/wiki/How-to-install-6LoWPAN-Linux-Kernel-on-Raspberry-Pi 
> I have all is needed:
> 	• OpenLabs Raspberry Pi 802.15.4 radio
> 	• Raspberry Pi 2 or Raspberry Pi 3
> 	• Atmel SAM R21 Xplained Pro
> but still fail to do successful ping. Two SAM R21 boards see each other, can ping, setup UDP server etc., but going according HowTo gives no effect. 
> No ping response both from raspberry nor from SAM R21. I managed go through all steps up to examples.
> Recently I'm using new raspberry kernel which support openlabs radio by default (just need to enable overlays), but still not working.
> Maybe there is some other up to date howto/tutorial which enable SAM R21 board and RPI to communicate.
> Finally I'm new to RIOT, is this right place to ask that question?
> Thanks,
> Tomek
> _______________________________________________
> devel mailing list
> devel at riot-os.org
> https://lists.riot-os.org/mailman/listinfo/devel

More information about the devel mailing list