kaspar at schleiser.de
Fri Feb 5 19:54:24 CET 2016
it is best to ask these questions on devel at riot-os.org...
On 02/03/2016 12:28 PM, Ilias Seitanidis wrote:
> I am currently working on RIOT with Atmel R21 boards. I want to
> ask you which branch should I use for my BR and if its possible
> some tips for the configuration.I tried the ethos_br branch ,
> I configured based on .After that I was able to ping only the
> interface 6,serial and not the interface 5,wireless. In the fibroute I
> added default route pointing affe::1(my computers interface) and still
> nothing.In my Computers routing table there are records for both affe::
> and abcd:: .
Please my current "implified border router" branch .
Compile, flash, then start "start_network.sh" as follows:
sudo sh start_network.st /dev/ttyXXX tap0 affe::/64
Make sure your Linux node has any non-link-local address configured on
any interface. If in doubt, add e.g., beef::1 to "lo".
Then, once running, at the ethos shell, configure affe::/64 on the
router's 6lowpan interface. Make sure to use the node's eui64 as last
64bit of its address.
E.g., my node has "fe80::5855:4443:9918:b576" on interface 5, so I
configure the prefix as "ifconfig 5 add affe::5855:4443:9918:b576".
RIOT still won't aswer pings to "affe::5855:4443:9918:b576" unless they
come from interface 5, but now other RIOT nodes should be pingable.
More information about the devel