[riot-devel] Raspberry Pi 3 and packet sniffing

smlng s at mlng.net
Fri Jun 3 09:32:55 CEST 2016

Hey again,

I forgot the pointer to [1]: https://github.com/RIOT-Makers/wpan-raspbian/wiki/Create-a-generic-Raspbian-image-with-6LoWPAN-support#31-transceiver-specific-device-tree-overlays


> Am 03.06.2016 um 09:28 schrieb smlng <s at mlng.net>:
> Hey Aaron,
>> Am 03.06.2016 um 01:42 schrieb Aaron Sowry <aeneby at gmail.com>:
>> For testing I've been using a RPi 2 with Openlabs' 802.15.4 radio[1],
>> which was relatively easy to get working with Wireshark. The Pi
>> recently destroyed my SD card however, including all the config I'd
>> done to set it up, so I figured I'd start from scratch with an RPi 3.
>> I can't seem to get it working this time though, and I was just
>> wondering if anyone else had managed to use the RPi 3 with this radio
>> for packet sniffing? I can't think of any reason why it shouldn't
>> work, but although the radio is detected properly and is able to be
>> manipulated using 'iwpan', it never sees any packets (although I know
>> the packets are being sent correctly, because I can sniff them with
>> another RIOT node).
>> So, before I start blaming the hardware, I thought I'd ask - has
>> anyone else managed to do this successfully on the RPi 3 with
>> raspbian?
> I personally use the RasPi as a border router and gateway with the 
> openlabs transceiver. Unfortunately I haven't had the time to test 
> with the new RasPi 3B, yet. 
> This would be bad news, if my favorite setup isn't working with Pi3 
> anymore. I just ordered a Pi3 myself and will start testing next week,
> I'll report back ASAP. 
> I assume you use latest Raspbian-Linux, with standard Kernel 4.4 and
> DTS overlay [1] or a custom (self-compiled) Linux-Kernel based on 
> bluetooth-next (btn) branch?
> Best,
>  Sebastian
> _______________________________________________
> devel mailing list
> devel at riot-os.org
> https://lists.riot-os.org/mailman/listinfo/devel

More information about the devel mailing list