brent7984 at gmail.com
Fri Apr 12 16:23:25 CEST 2019
I've had a look at the implementation pointed out by José. I cannot get the
Leshan server to register the client though. The client gets stuck with
-> State: STATE_REGISTERING
I think the IP addresses or possibly some bootstrapping procedure might be
the problem. I changed the IP address in the makefile to [::1]. Wireshark
shows a packet being sent to port 53 over UDP. Should this not be all the
client information sent to port 5683 using CoAP? What am I doing wrong?
On Wed, Apr 10, 2019 at 9:06 PM Leandro Lanzieri <
leandro.lanzieri at haw-hamburg.de> wrote:
> Hi Brenton,
> As José pointed out, that PR only implements some basic objects. To
> perform the update the device should expose a "Firmware Update Object"
> In the Wakaama repo there is an example of a basic structure for that
> object . Take a look of how I added the Light Control object to have
> an idea on how the package can be extended with new objects, and how to
> instantiate them. The example application should work.
> As Ken mentioned any comments or improvements on the PR are very
> On Wed, 2019-04-10 at 14:50 +0100, Ken Bannister wrote:
> > Thanks, José. I have been reviewing the PR, and I agree it definitely
> > is
> > usable. I think Leandro has addressed everything to this point.
> > Brenton, as you can see on the PR, you should be able to build and
> > run
> > the example. Please add your comments on that PR as well.
> > Thanks,
> > Ken
> > On 4/10/19 2:34 PM, José Alamos wrote:
> > > Hello Brenton,
> > >
> > > There's an open PR with a basic LWM2M Wakaama client for RIOT here
> > > .
> > > You can maybe give it a look.
> > >
> > > Does this solve your issue?
> > >
> > > Cheers,
> > > José
> > >
> > > : https://github.com/RIOT-OS/RIOT/pull/11036
> > >
> > > On Wed, 2019-04-10 at 15:11 +0200, Brenton Chetty wrote:
> > > > Hey guys, sorry to worry you'll. I just graduated, and I'm an
> > > > intern.
> > > > I need to update a STM32 device over the air using a Leshan
> > > > Server,
> > > > and a Wakaama Client (RIOT). I managed to send a .bin file from
> > > > the
> > > > Server to the RIOT_Wakaama client using the Linux native
> > > > interface. I
> > > > used the 2015 RIOT_Wakaama client example created by Robby14
> > > > (Github), as i do not know how to use the Wakaama pkg in the RIOT
> > > > base. Any ideas on how i should proceed with this task? How do I
> > > > use
> > > > the wakaama pkg? Any advice would be greatly appreciated!
> > > >
> > > > With thanks
> > > > Brenton
> > > > _______________________________________________
> > > > devel mailing list
> > > > devel at riot-os.org
> > > > https://lists.riot-os.org/mailman/listinfo/devel
> > >
> > > _______________________________________________
> > > devel mailing list
> > > devel at riot-os.org
> > > https://lists.riot-os.org/mailman/listinfo/devel
> > _______________________________________________
> > devel mailing list
> > devel at riot-os.org
> > https://lists.riot-os.org/mailman/listinfo/devel
> Leandro Lanzieri Rodriguez
> Hamburg University of Applied Sciences
> Berliner Tor 7, 20099 Hamburg, Germany, Room 4.81c
> Dept. Computer Science, Internet Technologies Group
> Phone: +49 40 42875 - 8426
> devel mailing list
> devel at riot-os.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the devel