[riot-notifications] [RIOT-OS/RIOT] murdock: enable esp32-wroom-32 for CI testing (#11449)
notifications at github.com
Fri Apr 26 12:50:12 CEST 2019
> I guess it depends on the board you really have.
They look like [this](http://www.smartarduino.com/view.php?id=95103), but I got them cheaply from China, so they might be clones. The printing on the backside is a little off.
> The [original ESP32 DevKitC V4](https://dl.espressif.com/dl/schematics/esp32_devkitc_v4-sch-20180607a.pdf) which is the master for all clones with ESP32-WROOM-32 modules has a capacitor between EN and GND.
I tried adding one, but only had 100uF caps lying around. Weirdly, esptool.py can now properly change to boot mode, reset or flash the device and get it's chip id etc. but the user code doesn't run anymore (board outputs only the garbage as seen in this PR's failed tests).
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the notifications