[riot-notifications] [RIOT-OS/RIOT] boards/particle-{xenon, argon, boron}: add initial support (#10563)

Francisco Acosta notifications at github.com
Tue Apr 30 14:55:50 CEST 2019


kYc0o commented on this pull request.



> @@ -0,0 +1,44 @@
+/**
+ at defgroup    boards_common_particle-mesh Particle Mesh common
+ at ingroup     boards
+ at brief       Common support for the Particle Mesh boards family (Xenon, Argon, Boron)
+
+### General information
+
+[Particle Mesh](https://www.particle.io/mesh/) are mesh-ready development kits.
+Depending on the board type (Xenon, Argon, Boron), it provides access to
+multiple communication protocols: BLE, 802.15.4, WiFi, LTE.
+
+### Flash the board
+
+Using the [Particle Mesh debugger](https://docs.particle.io/datasheets/accessories/mesh-accessories/#debugger),

I also tried quite a lot during the IETF 104 at Prague and I found that `dfu-util` is unable to flash at address 0, which is the address where the RIOT firmware is linked for. Maybe doing some magic is possible to link it and flash it at another address, maybe after the softdevice firwamre (and thus take advantage of it?)

-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/RIOT-OS/RIOT/pull/10563#discussion_r279739845
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/notifications/attachments/20190430/a5d90d9e/attachment-0001.html>


More information about the notifications mailing list