[riot-notifications] [RIOT-OS/RIOT] board/sltb001a: cannot flash with JLink when 'hello-world' is running and no error (#11059)
notifications at github.com
Mon Feb 25 13:40:52 CET 2019
When some firmwares are running on the `sltb001a` it cannot be flashed from JLink anymore but can still be flashed from the drag and drop feature.
It is at least the case for `hello-world`.
To recover the board, just flash `examples/default` with the drag and drop feature.
#### Steps to reproduce the issue
See if it flashes correctly:
BOARD=sltb001a make -C examples/default/ flash
It can be done multiple times
BOARD=sltb001a make -C examples/hello-world flash
Try flashing any application again with Jlink.
#### Expected results
You can keep flashing.
And in case of error the error code is non zero.
#### Actual results
The flash does not work from Jlink:
****** Error: Timeout while checking target RAM, RAMCode did not respond in time. (PC = 0x00000009, CPSR = 0x00000008, LR = 0x81000000)!
Failed to prepare for programming.
Failed to execute RAMCode for RAM check!
Unspecified error -1
Reset delay: 0 ms
Reset type NORMAL: Resets core & peripherals via SYSRESETREQ & VECTRESET bit.
Reset: Halt core after reset via DEMCR.VC_CORERESET.
Reset: Reset device via AIRCR.SYSRESETREQ.
And the returcode is `0`
SEGGER J-Link Commander V6.42d (Compiled Feb 15 2019 13:56:53)
DLL version V6.42d, compiled Feb 15 2019 13:56:43
Connecting to J-Link via USB...O.K.
Firmware: Silicon Labs J-Link OB compiled Nov 28 2017 15:39:56
Hardware version: V1.00
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the notifications