[riot-notifications] [RIOT-OS/RIOT] drivers/w5100: Fixed netdev_driver_t::recv() API (#10412)

Martine Lenders notifications at github.com
Tue Jan 29 16:31:01 CET 2019


> If I'm indeed unable to reproduce your issue, I think chances are high that your board or shield is flanky. Or maybe there is some timing issue in the driver that by luck is not triggered by the code generated by the toolchains I used. Would you mind testing again with binaries generated via the docker build to rule out that the issue is triggered by your toolchain?

Might be. I'll try later to test with Docker again.

> Btw: The W5100 draws on average 100mA [according to this site](https://www.itead.cc/wiki/W5100_Ethernet_Shield_V1.0) and the [Arudino Due](https://store.arduino.cc/arduino-due) is drawing up to 130mA. Some Notebooks do not comply with the USB standard when it comes to the current they provide. Have you tried to connect the Arudino on a Desktop PC or using a powered USB hub?

Up until now all tests were done via a USB hub ;-).

-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/RIOT-OS/RIOT/pull/10412#issuecomment-458583835
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/notifications/attachments/20190129/45b7d2b0/attachment-0001.html>


More information about the notifications mailing list