[riot-notifications] [RIOT-OS/RIOT] boards: add support for Phytec 'reel board' (#11096)

Juan I Carrano notifications at github.com
Mon Mar 4 17:42:54 CET 2019


What version of OpenOCD are you using? I'm getting the following error:

```
Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
	http://openocd.org/doc/doxygen/bugs.html
adapter speed: 10000 kHz
cortex_m reset_config sysresetreq
Info : CMSIS-DAP: SWD  Supported
Info : CMSIS-DAP: Interface Initialised (SWD)
Info : CMSIS-DAP: FW Version = 1.10
Info : SWCLK/TCK = 0 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1
Info : CMSIS-DAP: Interface ready
Info : reduce speed request: 10000kHz to 5000kHz maximum
Info : clock speed 10000 kHz
Info : SWD DPIDR 0x2ba01477
Info : nrf52.cpu: hardware has 6 breakpoints, 4 watchpoints
    TargetName         Type       Endian TapName            State       
--  ------------------ ---------- ------ ------------------ ------------
 0* nrf52.cpu          cortex_m   little nrf52.cpu          halted
target halted due to debug-request, current mode: Thread 
xPSR: 0x01000000 pc: 0x00000470 msp: 0x20000200
invalid subcommand "write_image erase /home/jcarrano/source/masterRIOT/examples/hello-world/bin/reel/hello-world.elf 0"
in procedure 'flash'
```

Also, if someone else wants to try this, be sure to move the switch out of the "off" position, seems like they cheaped out and didn't include a power multiplexer.

-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/RIOT-OS/RIOT/pull/11096#issuecomment-469323440
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/notifications/attachments/20190304/53146c91/attachment-0001.html>


More information about the notifications mailing list