[riot-notifications] [RIOT-OS/RIOT] Added board support for ESP32 TTGO Lora V1 board (#11482)

Yegor Yefremov notifications at github.com
Fri May 3 21:30:15 CEST 2019


yegorich commented on this pull request.



> +#define UART0_TXD   GPIO10 /**< direct I/O pin for UART_DEV(0) TxD, can't be changed */
+#define UART0_RXD   GPIO9  /**< direct I/O pin for UART_DEV(0) RxD, can't be changed */
+
+#if FLASH_MODE_DOUT || FLASH_MODE_DIO || DOXYGEN
+#ifndef UART1_TXD
+#define UART1_TXD   GPIO10  /**< direct I/O pin for UART_DEV(1) TxD */
+#endif
+#ifndef UART1_RXD
+#define UART1_RXD   GPIO9   /**< direct I/O pin for UART_DEV(1) RxD */
+#endif
+#else
+#warning Configuration problem: Flash mode is qio or qout, \
+         GPIO9 and GPIO10 are not available for UART1 as configured
+#endif
+/** @} */
+

According to this [pinout](https://primalcortex.files.wordpress.com/2017/11/ttgolorapinout_v2.jpg) UART2 is on pins GPIO16 and GPIO17. UART1 is not available.

-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/RIOT-OS/RIOT/pull/11482#pullrequestreview-233635875
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/notifications/attachments/20190503/3b3f457f/attachment.html>


More information about the notifications mailing list