[riot-notifications] [RIOT-OS/RIOT] boards/stm32f103c8: fix openocd config (#9760)

Gaƫtan Harter notifications at github.com
Wed May 8 17:28:24 CEST 2019


cladmi commented on this pull request.



> +set WORKAREASIZE 0x5000
+
+set CHIPNAME STM32F103C8Tx
+
+# Enable debug when in low power modes
+set ENABLE_LOW_POWER 1
+
+# Stop Watchdog counters when halt
+set STOP_WATCHDOG 1
+
+# STlink Debug clock frequency
+set CLOCK_FREQ 4000
+
+# use hardware reset, connect under reset
+# connect_assert_srst needed if low power mode application running (WFI...)
+reset_config srst_only srst_nogate connect_assert_srst

Something that could be nice, would be to update the `openocd` handling so you could say `OPENOCD_FILE=openocd_hw_reset.cfg` or something. This way, no need for a board specific variable but it would be another task for the future.
Openocd has `--filename` for the config file and `--search` for the search path which would work nicely in that case.

-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/RIOT-OS/RIOT/pull/9760#discussion_r282120272
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/notifications/attachments/20190508/f40d31d7/attachment.html>


More information about the notifications mailing list