[riot-notifications] [RIOT-OS/RIOT] boards: Added standalone ATmega328p (#11090)

Sebastian Meiling notifications at github.com
Mon Sep 9 12:17:51 CEST 2019

smlng approved this pull request.

this looks good to me, couldn't test on a bare atmega328p but as commented before tested on Arduino-uno with this board config and some simple redirects for the flasher.

> +
+will take care of everything. To use the programmer `<FOOBAR>` instead, run
+    make BOARD=atmega328p PROGRAMMER=<FOOBAR> flash
+## Serial Terminal
+Connect a TTL adapter with pins 2/RXD and 3/TXD an run
+    make BOARD=atmega328p term
+Please note that the supply voltage should be compatible with the logic level of
+the TTL adapter. Usually everything between 3.3 V and 5 V should work.
+## Caution
+Don't expect having a working network stack due to very limited resources.

you should be a smiley here

You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/notifications/attachments/20190909/f0d91ef6/attachment-0001.htm>

More information about the notifications mailing list