[riot-notifications] [RIOT-OS/RIOT] Arduino MRK WiFi 1010 support (#12200)
notifications at github.com
Wed Sep 11 14:57:11 CEST 2019
I saw that RIOT is already compatible with many Arduino boards, but the MKR WiFi 1010 is missing.
I tried to build and flash a simple "Hello World" following the steps in the quick start guide and using the MKRZERO as board in the Makefile (they are both from the MKR family and they share the same MCU: Atmel SAMD21G18A),
I'm able to successfully build the application in the RIOT VM but I'm stuck on the flash phase.
The `make flash` command gives me the following output:
"make" -C /home/vagrant/RIOT/boards/arduino-mkrzero
"make" -C /home/vagrant/RIOT/boards/common/arduino-mkr
"make" -C /home/vagrant/RIOT/core
"make" -C /home/vagrant/RIOT/cpu/samd21
"make" -C /home/vagrant/RIOT/cpu/cortexm_common
"make" -C /home/vagrant/RIOT/cpu/cortexm_common/periph
"make" -C /home/vagrant/RIOT/cpu/sam0_common
"make" -C /home/vagrant/RIOT/cpu/sam0_common/periph
"make" -C /home/vagrant/RIOT/cpu/samd21/periph
"make" -C /home/vagrant/RIOT/drivers
"make" -C /home/vagrant/RIOT/drivers/periph_common
"make" -C /home/vagrant/RIOT/sys
"make" -C /home/vagrant/RIOT/sys/auto_init
"make" -C /home/vagrant/RIOT/sys/newlib_syscalls_default
"make" -C /home/vagrant/RIOT/sys/pm_layered
"make" -C /home/vagrant/RIOT/sys/stdio_uart
text data bss dec hex filename
7080 120 2540 9740 260c /home/vagrant/RIOT/arduino_riot/bin/arduino-mkrzero/foobar.elf
/home/vagrant/RIOT/dist/tools/bossa/bossac -p /dev/ttyACM0 -e -i -w -v -b -R /home/vagrant/RIOT/arduino_riot/bin/arduino-mkrzero/foobar.bin
No device found on /dev/ttyACM0
/home/vagrant/RIOT/arduino_riot/../Makefile.include:554: recipe for target 'flash' failed
make: *** [flash] Error 1
I don't think it is a USB problem with the VM because if I use the `make term` command I can see the output of a program which I previously uploaded using the Arduino IDE. I also followed [those instructions](https://github.com/RIOT-OS/RIOT/tree/master/dist/tools/vagrant) for the VM configuration.
Is it a compatibility issue with the board or am I doing something wrong??
### Useful links
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the notifications