[riot-notifications] [RIOT-OS/RIOT] boards/arduino-mkrwan1300: add initial support (without LoRa) (#8354)
notifications at github.com
Fri Sep 27 10:01:54 CEST 2019
fjmolinas commented on this pull request.
Code looks good. Minor comment.
I'm going to run tests using #12304 to automate flashing.
> + * <img src="https://www.arduino.cc/en/uploads/Main/MKR1000_pinout.png"
+ * alt="Arduino MKR WAN 1300 pinout" style="height:800px;"/>
+ * ### Flash the board
+ * 1. Put the board in bootloader mode by double tapping the reset button.<br/>
+ * When the board is in bootloader mode, the user led (amber) oscillates
+ * smoothly.
+ * 2. Use `BOARD=arduino-mkrwan1300` with the `make` command.<br/>
+ * Example with `hello-world` application:
+ * ```
+ * make BOARD=arduino-mkrwan1300 -C examples/hello-world flash
+ * ```
Add a note that says board must should be unbpluged from the anti-static protective foam. I had the issue where the board wouldn't enumerate when still in the foam, seems it it somehow conductive (which seems like the worst material choice by arduino)
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the notifications