[riot-notifications] [RIOT-OS/RIOT] tests/candev: add mcp2515 + driver/mcp2515: add driver (#13624)

Wouter Symons notifications at github.com
Thu May 14 12:25:08 CEST 2020


> @wosym I did some more testing and it turns out one of the connectors I was using was broken...
> 
> Just to be sure: It is not intended to make a receive call and while waiting for a message make a send call, right?

Do you mean the shell command `receive`? This will read can-frames from a buffer. If the buffer is empty, it will block until a new can-frame is received.
So indeed, while it is blocking, you can't send can-frames yourself. This only applies to the test-app of course. The driver itself does not have this limitation.

> And I have tested these two issues again:
> 
> > The test itself couldn’t receive dataframes without any data although I saw that these frames were being received here.
> 
> > However, no extended frames were being received from neither. I could send extended frames and also see them through my logic analyzer, but nothing happened on the receiver side.
> 
> Both are still an issue, right?

Mhmmm, will have to take a look at those again. I'm not sure. Been a while since I've worked on it. 
Problem is though, that I do not have all the hardware anymore (switching companies). I'll see what I can do :) 


-- 
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/RIOT-OS/RIOT/pull/13624#issuecomment-628542110
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/notifications/attachments/20200514/c9a51ab3/attachment-0001.htm>


More information about the notifications mailing list