[riot-notifications] [RIOT-OS/RIOT] tests: add test for periph_gpio without stdio dep (#16583)
notifications at github.com
Mon Jul 5 19:09:09 CEST 2021
@kfessel commented on this pull request.
> @@ -0,0 +1,64 @@
+# Select pins suitable for testing
+# For each input mode one pin is configured accordingly and an output pin is used to display the
+# current value read. It is suggested that the corresponding output pins are connected to LEDs, so
+# that the output level is visualized.
+# For each GPIO IRQ flank one pin is configured accordingly and an output pin is toggled on each
+# IRQ triggered. Note that no debouncing is done in software, so expect some flickering on the
+# output pin if you don't connect a Schmitt trigger or so to the inputs.
+# Pin to use as floating input and corresponding output pin
+PIN_IN := GPIO_PIN(0, 0)
PIN_IN := GPIO_PIN(0, 0)
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the notifications