[riot-users] First steps with riot-os and redbee-econotag

Ludwig Ortmann ludwig.ortmann at fu-berlin.de
Sat Jan 17 20:53:46 CET 2015


Hi,

as this question was also asked (and answered) on the IRC, here's the excerpt:

```
18:41 < write_erase> Hi. I compiled hello-world with board redbee-econotag... But I can't read anything 
                     on ttyUSB0 or ttyUSB1... how can I get support ?
18:41 < write_erase> thx
18:53 < write_erase> Nevermind ::  ' kernel_init(): This is RIOT! (Version: 2014.12-109-gf6a41-cooper) 
                     ' ... That works .
19:06 < write_erase> Is that the normal behaviour for example/default : kernel_init(): This is RIOT! 
                     (Version: 2014.12-109-gf6a41-cooper)
19:06 < write_erase> kernel_init(): jumping into first task...
19:06 < write_erase> #!undef abort at 0x1c00a0 (0x6809490E) originating from 0x400fe8
20:46 <@gnubert> no, normally it should look like this:
20:46 <@gnubert> kernel_init(): jumping into first task...
20:46 <@gnubert> UART0 thread started.
20:46 <@gnubert> uart0_init() [OK]
20:46 <@gnubert> Native LTC4150 initialized.
20:46 <@gnubert> Native RTC initialized.
20:46 <@gnubert> Welcome to RIOT!
20:46 <@gnubert> >
20:46 <@gnubert> wiethout the "Native.." stuff off course, that's just the emulator
20:47 <@gnubert> sorry, I don't have an econotag at hand, but it's possible that you either have the 
                 wrong toolchain (did you read the wiki page for the board?) or that this error crept 
                 in unnoticed
```

Cheers, Ludwig

On Sat, Jan 17, 2015 at 07:34:59PM +0100, Olivier Fauchon wrote:
> Hi.
> 
> I tried to run riot on econotag this way:
> 
> cd examples
> cp -R default test1
> cd test1
> 
> Change board in makefile with 'redbee-econotag'
> make
> ...
>    text   data    bss    dec    hex filename
>   67196   2228  18020  87444  15594
> 
> ../../boards/redbee-econotag/tools/mc1322x-load.pl -f
> bin/redbee-econotag/default.hex -t /dev/ttyUSB1
> CONNECT
> Size: 69432 bytes
> Sending bin/redbee-econotag/default.hex
> done sending files.
> Board initialized.
> kernel_init(): This is RIOT! (Version: 2014.12-109-gf6a41-cooper)
> kernel_init(): jumping into first task...
> #!undef abort at 0x1c00a0 (0x6809490E) originating from 0x400fe8
> 
> 
> It seems riot boots, but can't run the first task...
> 
> Thanks for you help .
> 
> Olivier

> _______________________________________________
> users mailing list
> users at riot-os.org
> http://lists.riot-os.org/mailman/listinfo/users



More information about the users mailing list