[riot-users] CCN-lite with Arduino-mega2560

Martine Lenders authmillenon at gmail.com
Mon Jun 1 10:49:03 CEST 2015


Hi Changue,
currently we the only support the xbee s2 module for arduino due, as far as
I know. However this one is only ported for our new network architecture
(which also provides preliminary Ethernet support via the encx24j600 chip)
where there is currently no CCN-lite version for. We hope however to get
this out for our next release at the end of this month.

Kind regards,
Martine

2015-06-01 9:49 GMT+02:00 changue jung <ckjung1987 at gmail.com>:

> Oh, Thank you! :)
>
> Actually i already posted my question but,
> At first i wanted to use 'Ethernet' with 'EthernetShield + Ethernet Cable'
> But i saw an mailinglist that current RIOT doesn't support Ethernet..  is
> it available now?
>
> If not, can you recommend me some candidate of transceiver for
> Arduino-mega2560 ? I'm a newbie of this field ^^;
> Thank you very much!
>
> Sincerely,
> Changue
>
> 2015-06-01 16:39 GMT+09:00 Ludwig Ortmann <ludwig.ortmann at fu-berlin.de>:
>
>> Hi,
>>
>> The board you are using does not feature a transceiver.
>> In order to use the network stack you need to configure a transceiver
>> externally.  Which transceiver do you want to use?
>>
>> Cheers,
>> Ludwig
>>
>> Am 1. Juni 2015 06:34:55 MESZ, schrieb changue jung <ckjung1987 at gmail.com
>> >:
>> >Hello, everyone.
>> >
>> >I'm trying to play with CCN-lite with real hardware board
>> >(Arduino-mega2560)
>> >so, i followed the tutorial
>> >
>> >[RIOT] cd examples/ccn-lite-client
>> >
>> >then,
>> >
>> ># make BOARD=arduino-mega2560 flash
>> >
>> >as tutorial says...
>> >
>> >Below is the result of that command.
>> >
>> >What's wrong with it? and how could i fix it?
>> >
>> >Thanks in advance
>> >
>> >Changue
>> >
>>
>> >------------------------------------------------------------------------------------------------------------------
>> >
>> >root at comnet-Lenovo-IdeaPad-S400
>> :/home/comnet/RIOT/examples/ccn-lite-client#
>> >BOARD=arduino-mega2560 make all flash
>> >
>> >There are unsatisfied feature requirements: transceiver
>> >
>> >EXPECT ERRORS!
>> >
>> >Building application "ccn-lite-client" for "arduino-mega2560" with MCU
>> >"atmega2560".
>> >
>> >In file included from /home/comnet/RIOT/sys/include/transceiver.h:26:0,
>> >
>> >from /home/comnet/RIOT/examples/ccn-lite-client/main.c:31:
>> >
>> >/home/comnet/RIOT/sys/include/radio/types.h:79:5: error: unknown type
>> >name
>> >‘radio_packet_length_t’
>> >
>> >radio_packet_length_t length; ///< Length of payload
>> >
>> >^
>> >
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function
>> >‘riot_ccn_register_prefix’:
>> >
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:123:9: warning:
>> >unused
>> >variable ‘content_len’ [-Wunused-variable]
>> >
>> >int content_len = ccnl_riot_client_publish(_relay_pid, small_buf,
>> >faceid,
>> >type, big_buf);
>> >
>> >^
>> >
>> >In file included from
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:39:0:
>> >
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function
>> >‘riot_ccn_transceiver_start’:
>> >
>> >/home/comnet/RIOT/sys/net/include/ccn_lite/ccnl-riot.h:45:21: error:
>> >‘TRANSCEIVER_DEFAULT’ undeclared (first use in this function)
>> >
>> >#define TRANSCEIVER TRANSCEIVER_DEFAULT
>> >
>> >^
>> >
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:152:22: note: in
>> >expansion of macro ‘TRANSCEIVER’
>> >
>> >transceiver_init(TRANSCEIVER);
>> >
>> >^
>> >
>> >/home/comnet/RIOT/sys/net/include/ccn_lite/ccnl-riot.h:45:21: note:
>> >each
>> >undeclared identifier is reported only once for each function it
>> >appears in
>> >
>> >#define TRANSCEIVER TRANSCEIVER_DEFAULT
>> >
>> >^
>> >
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:152:22: note: in
>> >expansion of macro ‘TRANSCEIVER’
>> >
>> >transceiver_init(TRANSCEIVER);
>> >
>> >^
>> >
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c: In function
>> >‘riot_ccn_relay_config’:
>> >
>> >/home/comnet/RIOT/examples/ccn-lite-client/main.c:148:1: warning:
>> >control
>> >reaches end of non-void function [-Wreturn-type]
>> >
>> >}
>> >
>> >^
>> >
>> >make[1]: ***
>>
>> >[/home/comnet/RIOT/examples/ccn-lite-client/bin/arduino-mega2560/ccn-lite-client/main.o]
>> >Error 1
>> >
>> >make: *** [all] Error 2
>> >
>> >root at comnet-Lenovo-IdeaPad-S400
>> :/home/comnet/RIOT/examples/ccn-lite-client#
>> >
>> >
>> >------------------------------------------------------------------------
>> >
>> >_______________________________________________
>> >users mailing list
>> >users at riot-os.org
>> >http://lists.riot-os.org/mailman/listinfo/users
>>
>> _______________________________________________
>> users mailing list
>> users at riot-os.org
>> http://lists.riot-os.org/mailman/listinfo/users
>>
>
>
> _______________________________________________
> users mailing list
> users at riot-os.org
> http://lists.riot-os.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/users/attachments/20150601/e008d3da/attachment.html>


More information about the users mailing list