[riot-users] wireshark for RIOT

Xili Wan wanxili at gmail.com
Wed Jun 10 00:23:53 CEST 2015


Thanks. I've solved this problem. The tap devices are showing up in the
interface list of wireshark, including tap devices. The tap devices can
only have packets when you using them.

On Tue, Jun 9, 2015 at 3:07 PM, Martine Lenders <authmillenon at gmail.com>
wrote:

> Hi Xili,
> did you use the tapsetup script (cpu/native/tapsetup.sh). Usually you need
> to set the user for the tap interface to yourself. If you do it by hand:
>
> sudo ip tuntap add dev tap0 mode tap user ${USER}
>
> Also make sure you configured the setuid for wireshark correctly and are
> in the wireshark user group:
> https://ask.wireshark.org/questions/7976/wireshark-setup-linux-for-nonroot-user
>
> Hope this was helpful,
> Martine
>
> 2015-06-09 20:32 GMT+02:00 Xili Wan <wanxili at gmail.com>:
>
>> Hi,
>>
>>    Another question is about using wireshark to monitor the native port.
>> I installed wireshark on ubuntu and the plugin for RIOT, but found it
>> cannot monitor tap devices (tap0, tap1). This is not the wireshark's
>> problem, since it can monitor eth0 device.
>>
>>    How to use the wireshark to monitor the native port?
>>
>>
>>  Thanks,
>>
>>
>> Xili
>>
>> _______________________________________________
>> users mailing list
>> users at riot-os.org
>> http://lists.riot-os.org/mailman/listinfo/users
>>
>>
>
> _______________________________________________
> users mailing list
> users at riot-os.org
> http://lists.riot-os.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/users/attachments/20150609/6ed1ae3b/attachment-0001.html>


More information about the users mailing list