[riot-users] Ping from tap interface of one RIOT instance to another dont work.

Rikhu Prasad rikhuprasad at gmail.com
Tue Jan 12 15:43:31 CET 2016


Hi,

I added an external ArduinoXBee and still the same issue. I am curious
whether RIOT supports networking for arduino-mega2560. Because in the
following command I don't see that arduino-mega2560 is included [I had to
add it so that its included as you advised]. I am assuming that for all the
boards listed, networking has been checked to be working, but I am curious
what for arduino-mega2560.

IN MAKEFILE :
BOARD_PROVIDES_NETIF := airfy-beacon fox iotlab-m3 mulle native nrf51dongle
\
nrf6310 pba-d-01-kw2x pca10000 pca10005 saml21-xpro samr21-xpro spark-core \
yunjia-nrf51822

Is there any other way to check if the driver as well as the
`gnrc_netif_default` has been added properly? The below verbose output
shows its been compiled.

rikhu at rikhu-Lenovo-G50-70:~/RIOT/examples/default$ make all flash term
BOARD=arduino-mega2560
Building application "default" for "arduino-mega2560" with MCU "atmega2560".

"make" -C /home/rikhu/RIOT/boards/arduino-mega2560
"make" -C /home/rikhu/RIOT/core
"make" -C /home/rikhu/RIOT/cpu/atmega2560
"make" -C /home/rikhu/RIOT/cpu/atmega2560/periph
"make" -C /home/rikhu/RIOT/cpu/atmega_common
"make" -C /home/rikhu/RIOT/drivers
"make" -C /home/rikhu/RIOT/drivers/xbee
"make" -C /home/rikhu/RIOT/sys
"make" -C /home/rikhu/RIOT/sys/auto_init
"make" -C /home/rikhu/RIOT/sys/auto_init/netif
"make" -C /home/rikhu/RIOT/sys/net/gnrc
"make" -C /home/rikhu/RIOT/sys/net/gnrc/netapi
"make" -C /home/rikhu/RIOT/sys/net/gnrc/netif
"make" -C /home/rikhu/RIOT/sys/net/gnrc/netif/hdr
"make" -C /home/rikhu/RIOT/sys/net/gnrc/netreg
"make" -C /home/rikhu/RIOT/sys/net/gnrc/pktbuf_static
"make" -C /home/rikhu/RIOT/sys/net/gnrc/pktdump
"make" -C /home/rikhu/RIOT/sys/od
"make" -C /home/rikhu/RIOT/sys/ps
"make" -C /home/rikhu/RIOT/sys/shell
"make" -C /home/rikhu/RIOT/sys/shell/commands
"make" -C /home/rikhu/RIOT/sys/tsrb
"make" -C /home/rikhu/RIOT/sys/uart_stdio
"make" -C /home/rikhu/RIOT/sys/xtimer
   text   data    bss    dec    hex filename
   7828    718    715   9261   242d
/home/rikhu/RIOT/examples/default/bin/arduino-mega2560/default.elf
avrdude -v -p m2560 -c stk500v2 -P /dev/ttyACM0 -b 115200 -F -U
flash:w:bin/arduino-mega2560/default.hex

avrdude: Version 6.1, compiled on Nov 23 2014 at 21:15:32
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/home/rikhu/.avrduderc"
         User configuration file does not exist or is not a regular file,
skipping

         Using Port                    : /dev/ttyACM0
         Using Programmer              : stk500v2
         Overriding Baud Rate          : 115200
         AVR Part                      : ATmega2560
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PA0
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page
          Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW
 MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
           eeprom        65    10     8    0 no       4096    8      0
 9000  9000 0x00 0x00
           flash         65    10   256    0 yes    262144  256   1024
 4500  4500 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0
 9000  9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0
 9000  9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0
 9000  9000 0x00 0x00
           lock           0     0     0    0 no          1    0      0
 9000  9000 0x00 0x00
           calibration    0     0     0    0 no          1    0      0
0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0
0     0 0x00 0x00

         Programmer Type : STK500V2
         Description     : Atmel STK500 Version 2.x firmware
         Programmer Model: AVRISP
         Hardware Version: 15
         Firmware Version Master : 2.10
         Vtarget         : 0.0 V
         SCK period      : 239.9 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9801
avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0
avrdude: safemode: efuse reads as 0
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be
performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "bin/arduino-mega2560/default.hex"
avrdude: input file bin/arduino-mega2560/default.hex auto detected as Intel
Hex
avrdude: writing flash (8546 bytes):

Writing | ################################################## | 100% 1.39s

avrdude: 8546 bytes of flash written
avrdude: verifying flash memory against bin/arduino-mega2560/default.hex:
avrdude: load data flash data from input file
bin/arduino-mega2560/default.hex:
avrdude: input file bin/arduino-mega2560/default.hex auto detected as Intel
Hex
avrdude: input file bin/arduino-mega2560/default.hex contains 8546 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 1.10s

avrdude: verifying ...
avrdude: 8546 bytes of flash verified

avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0
avrdude: safemode: efuse reads as 0
avrdude: safemode: Fuses OK (E:00, H:00, L:00)

avrdude done.  Thank you.

/home/rikhu/RIOT/dist/tools/pyterm/pyterm -b 9600 -p /dev/ttyACM0
2016-01-12 15:39:24,609 - INFO # Connect to serial port /dev/ttyACM0
Welcome to pyterm!
Type '/exit' to exit.
2016-01-12 15:39:25,611 - INFO #

2016-01-12 15:39:25,614 - INFO # main(): This is RIOT! (Version:
2015.12-devel-526-gbfb6-rikhu-Lenovo-G50-70)
2016-01-12 15:39:25,617 - INFO # Welcome to RIOT!
help
2016-01-12 15:39:27,857 - INFO # > help
2016-01-12 15:39:27,894 - INFO # Command              Description
2016-01-12 15:39:27,935 - INFO # ---------------------------------------
2016-01-12 15:39:27,976 - INFO # reboot               Reboot the node
2016-01-12 15:39:28,041 - INFO # ps                   Prints information
about running threads.



Regards,
Rikhu

On Mon, Jan 11, 2016 at 10:16 AM, Hauke Petersen <
hauke.petersen at fu-berlin.de> wrote:

> Hej,
>
> I did have a similar issue, though as stated I thought updating avrdude
> fixed it for me... I can't really recall if I did something else to get it
> to work.  But maybe you can just PR a fix with to the `make flash` target
> for the `arduino-mega2560` board with the `avrdude` command parameters that
> were working for you?
>
> Regarding `ifconfig`: For your board no networking support is compiled in
> for the default example, since the board does not come with any on-board
> network devices. You could would need to connect some external
> radio/ethernet device to the board and add the the driver as well as the
> `gnrc_netif_default` module to the USEMODULE variable -> this should
> compile the `ifconfig` shell command into your application.
>
> Cheers,
> Hauke
>
>
>
> On 10.01.2016 17:11, Rikhu Prasad wrote:
>
> I did try to update avrdude to the latest version (thinking maybe the
> image created by the older version was not fully compatible) - available at
> http://download.savannah.gnu.org/releases/avrdude/
>
> Now I am using Ubuntu 14.04. I get the below error while flashing. avrdude
> version 6.2.
>
> System wide configuration file is "/usr/local/etc/avrdude.conf"
>          User configuration file is "/home/rikhu/.avrduderc"
>          User configuration file does not exist or is not a regular file,
> skipping
>
>          Using Port                    : /dev/ttyACM0
>          Using Programmer              : stk500v2
>          Overriding Baud Rate          : 115200
> make: *** [flash] Floating point exception (core dumped)
>
> Anyone faced these issues, please.
>
> Regards,
> Rikhu
>
> On Sat, Jan 9, 2016 at 1:57 AM, Rikhu Prasad <rikhuprasad at gmail.com>
> wrote:
>
>> Hi ,
>>
>> Thank you. It works finally, I tried the below for the Mega 2560 by
>> checking what the IDE does actually and and following accordingly. So, the
>> below works for me without updating the avrdude. I am using avrdude 6.1
>> version.
>>
>> avrdude -v -patmega2560 -cwiring -P/dev/ttyACM0 -b115200 -D
>> -Uflash:w:bin/arduino-mega2560/default.hex
>>
>> Now the issue is that I am not able to use ifconfig (networking) does not
>> work. When I do a help command, it only shows as below... Does not have
>> support for ifconfig. Your opinions would give me further insights.
>>
>> 2016-01-09 01:51:54,238 - INFO # Welcome to RIOT!
>> 2016-01-09 01:51:54,238 - INFO # > >
>>
>> 2016-01-09 01:51:54,239 - INFO # main(): This is RIOT!
>> 2016-01-09 01:51:54,250 - INFO # Welcome to RIOT!
>> help
>> 2016-01-09 01:51:56,408 - INFO # > help
>> 2016-01-09 01:51:56,445 - INFO # Command              Description
>> 2016-01-09 01:51:56,486 - INFO # ---------------------------------------
>> 2016-01-09 01:51:56,523 - INFO # reboot               Reboot the node
>> 2016-01-09 01:51:56,593 - INFO # ps                   Prints information
>> about running threads.
>>
>>
>> Regards,
>> Rikhu
>>
>>
>> On Thu, Jan 7, 2016 at 1:39 PM, Hauke Petersen <
>> <hauke.petersen at fu-berlin.de>hauke.petersen at fu-berlin.de> wrote:
>>
>>> Hej!
>>>
>>> I think I had a similar problem once when trying to flash the
>>> arduino-mega2560. If I recall correctly, I think I fixed this by updating
>>> my avrdude tool to a new version (build it from their master). My current
>>> version is 6.2-20151117 which works fine under Linux Mint 17. Maybe you
>>> give that a try?
>>>
>>> Cheers,
>>> Hauke
>>>
>>>
>>>
>>> On 07.01.2016 13:32, Rikhu Prasad wrote:
>>>
>>> Hi Cenk,
>>>
>>> Thank you for your response. Its very strange that its not working. I
>>> tried to use another piece of Arduino Mega 2560, and it gives the same
>>> error. I am trying to flash using the default USB connector.
>>>
>>> Just to make further clear, I tried flashing it in "Arduino MEGA ADK for
>>> Android" [Link: <https://www.arduino.cc/en/Main/ArduinoBoardMegaADK>
>>> https://www.arduino.cc/en/Main/ArduinoBoardMegaADK ] using default USB
>>> connector. Its extremely strange that the flashing works for this!!! It may
>>> be because The MEGA ADK is based on the Mega 2560. But, how can it be that
>>> flashing works for this and does not work in the Mega 2560 (which its
>>> mentioned specifically in the RIOT that it supports for this device). One
>>> problem with ArduinoBoardMegaADK is that I do not get networking support -
>>> after flashing I cannot use ifconfig for the device. Probably it should be
>>> that networking is its not supported for ArduinoBoardMegaADK.
>>>
>>> But my main concern/problem I am facing is why flasehing does not work
>>> in Mega 2560 in 2 devices when trying to flash from USB. Both give same
>>> errors.
>>>
>>> Regards,
>>> Rikhu
>>>
>>> On Tue, Jan 5, 2016 at 5:46 PM, Cenk G√ľndogan <
>>> <cenk.guendogan at fu-berlin.de>cenk.guendogan at fu-berlin.de> wrote:
>>>
>>>> Hello Rikhu,
>>>>
>>>> Sorry for the late response.
>>>> I just tried to flash the default example (master) on an arduino mega
>>>> 2560 board
>>>> and it works without any errors. Does your problem still persist?
>>>> Admittedly, I have not much knowledge in this area. Maybe Hauke or
>>>> someone else
>>>> can give more hints regarding this problem?
>>>>
>>>> Best,
>>>> Cenk
>>>>
>>>>
>>>> On 29.12.2015 15 <29.12.2015%2015>:33, Rikhu Prasad wrote:
>>>>
>>>> *Hi Cenk,*
>>>>
>>>> *I am trying to use the example provided for Arduino Mega 2560, and I
>>>> believe it should work for this board too. But I receive the below error. *
>>>>
>>>> *When I reset the board before uploading, I get timeout errors (listed
>>>> below). The same issue happens with the default example provided in RIOT.
>>>> When I upload the Receive and/or Transmit lights on the Arduino blink. *
>>>>
>>>> *To test if Arduino is working : I tested with Blink sketch using
>>>> Arduino IDE and it works fine. I even tried without the IDE using
>>>> Arduino-Makefile (
>>>> <https://github.com/sudar/Arduino-Makefile>https://github.com/sudar/Arduino-Makefile
>>>> <https://github.com/sudar/Arduino-Makefile>) to reassure myself and it
>>>> works. The problem happens with using RIOT. *
>>>>
>>>> *Without RESET:*
>>>> *avrdude -p m2560 -c stk500v2 -P /dev/ttyACM0 -b 115200 -F -U
>>>> flash:w:bin/arduino-mega2560/default.hex*
>>>>
>>>> *avrdude: AVR device initialized and ready to accept instructions*
>>>>
>>>> *Reading | ################################################## | 100%
>>>> 0.01s*
>>>>
>>>> *avrdude: Device signature = 0x1e9801*
>>>> *avrdude: NOTE: "flash" memory has been specified, an erase cycle will
>>>> be performed*
>>>> *         To disable this feature, specify the -D option.*
>>>> *avrdude: erasing chip*
>>>> *avrdude: stk500v2_command(): command failed*
>>>>
>>>> *avrdude done.  Thank you.*
>>>>
>>>> *make: *** [flash] Error 255*
>>>>
>>>>
>>>> *After Reset:*
>>>> *"make" -C /home/rikhu/Desktop/RIOT/sys/xtimer*
>>>> *   text   data    bss    dec    hex filename*
>>>> *  48670   5326  11189  65185   fea1
>>>> /home/rikhu/Desktop/RIOT-Tutorial/application/bin/arduino-mega2560/ieee_wf-iot_2015.elf*
>>>> *avrdude -p m2560 -c stk500v2 -P /dev/ttyACM0 -b 115200 -F -U
>>>> flash:w:bin/arduino-mega2560/ieee_wf-iot_2015.hex*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_getsync(): timeout communicating with programmer*
>>>>
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>> *avrdude: stk500v2_ReceiveMessage(): timeout*
>>>>
>>>>
>>>>
>>>>
>>>> Thanks,
>>>> Rikhu
>>>>
>>>> On Tue, Dec 22, 2015 at 9:45 PM, Cenk G√ľndogan <
>>>> <cenk.guendogan at fu-berlin.de>cenk.guendogan at fu-berlin.de> wrote:
>>>>
>>>>> Hello Rikhu,
>>>>>
>>>>> Can you try creating the tap interfaces with the tapsetup script
>>>>> located in RIOT/dist/tools/tapsetup/tapsetup ?
>>>>>
>>>>> This tapsetup script will create an interface (br0) that serves as a
>>>>> bridge
>>>>> between tap0 and tap1 (and other taps created by the tapsetup script).
>>>>>
>>>>> Thank you for pointing out this issue, I will address this in the
>>>>> tutorial.
>>>>>
>>>>> Best,
>>>>> Cenk
>>>>>
>>>>>
>>>>> On 22.12.2015 21:39, Rikhu Prasad wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I followed the following tutorial to get used to developing
>>>>> application in RIOT.
>>>>>
>>>>> <https://github.com/cgundogan/RIOT-Tutorial/>
>>>>> https://github.com/cgundogan/RIOT-Tutorial/
>>>>>
>>>>> As per the below, I have configured one instance of RIOT to tap0 and
>>>>> another instance to tap1. and try to ping between 2 instances and this does
>>>>> not work. Am I missing something? Please advice.
>>>>>
>>>>> 1. Running RIOT on Native -> 8th point..
>>>>>
>>>>> *RIOT  (Instance 1):*
>>>>>
>>>>> ifconfig
>>>>> Iface  4   HWaddr: 22:a4:56:14:8a:61
>>>>>            MTU:1280  HL:64
>>>>>            Source address length: 6
>>>>>            Link type: wired
>>>>>            inet6 addr: ff02::1/128  scope: local [multicast]
>>>>>            inet6 addr: fe80::20a4:56ff:fe14:8a61/64  scope: local
>>>>>            inet6 addr: ff02::1:ff14:8a61/128  scope: local [multicast]
>>>>>            inet6 addr: ff02::2/128  scope: local [multicast]
>>>>>
>>>>> *RIOT (Instance 2) : *
>>>>>
>>>>> ifconfig
>>>>> Iface  4   HWaddr: ca:ec:7d:fd:db:d0
>>>>>            MTU:1280  HL:64
>>>>>            Source address length: 6
>>>>>            Link type: wired
>>>>>            inet6 addr: ff02::1/128  scope: local [multicast]
>>>>>            inet6 addr: fe80::c8ec:7dff:fefd:dbd0/64  scope: local
>>>>>            inet6 addr: ff02::1:fffd:dbd0/128  scope: local [multicast]
>>>>>            inet6 addr: ff02::2/128  scope: local [multicast]
>>>>>
>>>>> *I try to ping RIOT1 from RIOT2 : *
>>>>>
>>>>> ping6 fe80::20a4:56ff:fe14:8a61
>>>>> ping timeout
>>>>> ping timeout
>>>>> ping timeout
>>>>> --- fe80::20a4:56ff:fe14:8a61 ping statistics ---
>>>>> 3 packets transmitted, 0 received, 100% packet loss
>>>>>
>>>>> I try to ping RIOT instance 1 from instance 2 and dont work. I tried
>>>>> various other means like mentioning tap interface in ping command, still,
>>>>> don't work.
>>>>>
>>>>>
>>>>>
>>>>> -Rik
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> users mailing listusers at riot-os.orghttps://lists.riot-os.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> users mailing list
>>>>> <users at riot-os.org>users at riot-os.org
>>>>> <https://lists.riot-os.org/mailman/listinfo/users>
>>>>> https://lists.riot-os.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> users mailing listusers at riot-os.orghttps://lists.riot-os.org/mailman/listinfo/users
>>>
>>>
>>>
>>> _______________________________________________
>>> users mailing list
>>> users at riot-os.org
>>> https://lists.riot-os.org/mailman/listinfo/users
>>>
>>>
>>
>
>
> _______________________________________________
> users mailing listusers at riot-os.orghttps://lists.riot-os.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> users mailing list
> users at riot-os.org
> https://lists.riot-os.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/users/attachments/20160112/ea344bff/attachment-0001.html>


More information about the users mailing list