[riot-users] Flashing MSP430 based board CM5000MSP

Peter Kietzmann peter.kietzmann at haw-hamburg.de
Tue Jul 5 08:55:28 CEST 2016


Hi Shovon,

we don't have a board "CM5000MSP" in RIOT. Do you mean TelosB? We have a 
couple of MSP430 based boards in RIOT. Some, e.g. MS*B*-430H need the 
Olimex debugger. Some don't, e.g. TelosB. You need to build and flash 
for the correct BOARD and obviously the board must be supported by RIOT.

Best
Peter

Am 05.07.2016 um 06:40 schrieb Nazmul Alam:
> Hello,
> I was trying to run an example program (hello-world) on the MSP430 based
> board to test out riot-os, but flashing is failing -
> make BOARD=msb-430 flash
> with following error
> usbutil: unable to find a device matching 15ba:0031
>
> The device is connected directly to USB port and I believe it is using
> FDTI driver (USB-RS232).
> lsusb shows -
> Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
> Bus 002 Device 003: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
> Bus 001 Device 007: ID 0403:6001 Future Technology Devices
> International, Ltd FT232 USB-Serial (UART) IC
> Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc.
> Bus 004 Device 002: ID 0451:8140 Texas Instruments, Inc.
>
> but the make flash is trying to use
> mspdebug -j olimex "prog myihex"
> so I believe the programmer is olimex (google shows JTAG based programmer).
>
> So, how can I flash riot-os in the device over the FDTI?
>
> P/S: I was able to flash contiki os in it over the FDTI driver.
>
> Thanks in advance.
> regards,
> Shovon.
>
>
> _______________________________________________
> users mailing list
> users at riot-os.org
> https://lists.riot-os.org/mailman/listinfo/users
>

-- 
Peter Kietzmann

Hamburg University of Applied Sciences
Dept. Informatik, Internet Technologies Group
Berliner Tor 7, 20099 Hamburg, Germany
Fon: +49-40-42875-8426
Web: http://www.haw-hamburg.de/inet


More information about the users mailing list