[riot-users] Flashing MSP430 based board CM5000MSP

Peter Kietzmann peter.kietzmann at haw-hamburg.de
Tue Jul 5 09:33:06 CEST 2016


Hi,

the TelosB is supported by RIOT, yes. And it does not need an Olimex 
adapter cause it has a "GoodFET" jtag adapter on board. The script 
RIOT/dist/tools/goodfet/goodfet.bsl is called by the "make flash" command.

Did you try "BOARD=telosb make clean all flash"? It worked for me 
without any problems.

Cheers
Peter

Am 05.07.2016 um 09:17 schrieb Nazmul Alam:
> Hello Peter,
> Thanks for quick response.
> Yes, The board is TelosB. And AFAI understand the board is supported by
> riot-os.
>
> But I was unable to flash it as it uses mspdebug tool which in turns
> uses the Olimex programmer.
>
> Is it mandatory for the board?
> Thanks again.
> Regards,
>
> On Jul 5, 2016 2:55 AM, "Peter Kietzmann"
> <peter.kietzmann at haw-hamburg.de <mailto:peter.kietzmann at haw-hamburg.de>>
> wrote:
>
>     Hi Shovon,
>
>     we don't have a board "CM5000MSP" in RIOT. Do you mean TelosB? We
>     have a couple of MSP430 based boards in RIOT. Some, e.g. MS*B*-430H
>     need the Olimex debugger. Some don't, e.g. TelosB. You need to build
>     and flash for the correct BOARD and obviously the board must be
>     supported by RIOT.
>
>     Best
>     Peter
>
>     Am 05.07.2016 um 06:40 schrieb Nazmul Alam:
>
>         Hello,
>         I was trying to run an example program (hello-world) on the
>         MSP430 based
>         board to test out riot-os, but flashing is failing -
>         make BOARD=msb-430 flash
>         with following error
>         usbutil: unable to find a device matching 15ba:0031
>
>         The device is connected directly to USB port and I believe it is
>         using
>         FDTI driver (USB-RS232).
>         lsusb shows -
>         Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc.
>         TUSB8041 4-Port Hub
>         Bus 002 Device 003: ID 0451:8142 Texas Instruments, Inc.
>         TUSB8041 4-Port Hub
>         Bus 001 Device 007: ID 0403:6001 Future Technology Devices
>         International, Ltd FT232 USB-Serial (UART) IC
>         Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc.
>         Bus 004 Device 002: ID 0451:8140 Texas Instruments, Inc.
>
>         but the make flash is trying to use
>         mspdebug -j olimex "prog myihex"
>         so I believe the programmer is olimex (google shows JTAG based
>         programmer).
>
>         So, how can I flash riot-os in the device over the FDTI?
>
>         P/S: I was able to flash contiki os in it over the FDTI driver.
>
>         Thanks in advance.
>         regards,
>         Shovon.
>
>
>         _______________________________________________
>         users mailing list
>         users at riot-os.org <mailto:users at riot-os.org>
>         https://lists.riot-os.org/mailman/listinfo/users
>
>
>     --
>     Peter Kietzmann
>
>     Hamburg University of Applied Sciences
>     Dept. Informatik, Internet Technologies Group
>     Berliner Tor 7, 20099 Hamburg, Germany
>     Fon: +49-40-42875-8426 <tel:%2B49-40-42875-8426>
>     Web: http://www.haw-hamburg.de/inet
>     _______________________________________________
>     users mailing list
>     users at riot-os.org <mailto:users at riot-os.org>
>     https://lists.riot-os.org/mailman/listinfo/users
>
>
>
> _______________________________________________
> users mailing list
> users at riot-os.org
> https://lists.riot-os.org/mailman/listinfo/users
>

-- 
Peter Kietzmann

Hamburg University of Applied Sciences
Dept. Informatik, Internet Technologies Group
Berliner Tor 7, 20099 Hamburg, Germany
Fon: +49-40-42875-8426
Web: http://www.haw-hamburg.de/inet


More information about the users mailing list