[riot-users] Flashing MSP430 based board CM5000MSP

Nazmul Alam fadedreamz at gmail.com
Tue Jul 5 09:41:13 CEST 2016


Hi Peter,
I think I used make BOARD=msb-430 instead of telosb. May be I mistakenly
used MC model as board because in my cause the script was different than
you mentioned.

I will check it and confirm it.

Thanks again for the direction.

On Tue, Jul 5, 2016 at 3:33 AM, Peter Kietzmann <
peter.kietzmann at haw-hamburg.de> wrote:

> Hi,
>
> the TelosB is supported by RIOT, yes. And it does not need an Olimex
> adapter cause it has a "GoodFET" jtag adapter on board. The script
> RIOT/dist/tools/goodfet/goodfet.bsl is called by the "make flash" command.
>
> Did you try "BOARD=telosb make clean all flash"? It worked for me without
> any problems.
>
> Cheers
> Peter
>
> Am 05.07.2016 um 09:17 schrieb Nazmul Alam:
>
>> Hello Peter,
>> Thanks for quick response.
>> Yes, The board is TelosB. And AFAI understand the board is supported by
>> riot-os.
>>
>> But I was unable to flash it as it uses mspdebug tool which in turns
>> uses the Olimex programmer.
>>
>> Is it mandatory for the board?
>> Thanks again.
>> Regards,
>>
>> On Jul 5, 2016 2:55 AM, "Peter Kietzmann"
>> <peter.kietzmann at haw-hamburg.de <mailto:peter.kietzmann at haw-hamburg.de>>
>>
>> wrote:
>>
>>     Hi Shovon,
>>
>>     we don't have a board "CM5000MSP" in RIOT. Do you mean TelosB? We
>>     have a couple of MSP430 based boards in RIOT. Some, e.g. MS*B*-430H
>>     need the Olimex debugger. Some don't, e.g. TelosB. You need to build
>>     and flash for the correct BOARD and obviously the board must be
>>     supported by RIOT.
>>
>>     Best
>>     Peter
>>
>>     Am 05.07.2016 um 06:40 schrieb Nazmul Alam:
>>
>>         Hello,
>>         I was trying to run an example program (hello-world) on the
>>         MSP430 based
>>         board to test out riot-os, but flashing is failing -
>>         make BOARD=msb-430 flash
>>         with following error
>>         usbutil: unable to find a device matching 15ba:0031
>>
>>         The device is connected directly to USB port and I believe it is
>>         using
>>         FDTI driver (USB-RS232).
>>         lsusb shows -
>>         Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc.
>>         TUSB8041 4-Port Hub
>>         Bus 002 Device 003: ID 0451:8142 Texas Instruments, Inc.
>>         TUSB8041 4-Port Hub
>>         Bus 001 Device 007: ID 0403:6001 Future Technology Devices
>>         International, Ltd FT232 USB-Serial (UART) IC
>>         Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc.
>>         Bus 004 Device 002: ID 0451:8140 Texas Instruments, Inc.
>>
>>         but the make flash is trying to use
>>         mspdebug -j olimex "prog myihex"
>>         so I believe the programmer is olimex (google shows JTAG based
>>         programmer).
>>
>>         So, how can I flash riot-os in the device over the FDTI?
>>
>>         P/S: I was able to flash contiki os in it over the FDTI driver.
>>
>>         Thanks in advance.
>>         regards,
>>         Shovon.
>>
>>
>>         _______________________________________________
>>         users mailing list
>>         users at riot-os.org <mailto:users at riot-os.org>
>>         https://lists.riot-os.org/mailman/listinfo/users
>>
>>
>>     --
>>     Peter Kietzmann
>>
>>     Hamburg University of Applied Sciences
>>     Dept. Informatik, Internet Technologies Group
>>     Berliner Tor 7, 20099 Hamburg, Germany
>>     Fon: +49-40-42875-8426 <tel:%2B49-40-42875-8426>
>>     Web: http://www.haw-hamburg.de/inet
>>     _______________________________________________
>>     users mailing list
>>     users at riot-os.org <mailto:users at riot-os.org>
>>     https://lists.riot-os.org/mailman/listinfo/users
>>
>>
>>
>> _______________________________________________
>> users mailing list
>> users at riot-os.org
>> https://lists.riot-os.org/mailman/listinfo/users
>>
>>
> --
> Peter Kietzmann
>
> Hamburg University of Applied Sciences
> Dept. Informatik, Internet Technologies Group
> Berliner Tor 7, 20099 Hamburg, Germany
> Fon: +49-40-42875-8426
> Web: http://www.haw-hamburg.de/inet
> _______________________________________________
> users mailing list
> users at riot-os.org
> https://lists.riot-os.org/mailman/listinfo/users
>



-- 
with best regards,
       Nazmul Alam Shovon


*শুভেচ্ছান্তে,       নাজমুল আলম শোভন*

email : fadedreamz at gmail.com
blog : http://yourdigitaleffects.blogspot.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/users/attachments/20160705/8726450a/attachment-0001.html>


More information about the users mailing list