[riot-users] Flashing MSP430 based board CM5000MSP

Nazmul Alam fadedreamz at gmail.com
Tue Jul 5 22:49:03 CEST 2016


Hello Peter,
Thank you again for your direction, it flashed correctly using goodfet
programmer.

However there is no output in the pyterm if I reset the device.

sudo ../tools/pyterm/pyterm -b 115200 -p /dev/ttyUSB0
No handlers could be found for logger "root"
2016-07-05 12:44:31,199 - INFO # Connect to serial port /dev/ttyUSB0
Welcome to pyterm!
Type '/exit' to exit.

Any suggestions?
Thanks and regards,


On Tue, Jul 5, 2016 at 3:41 AM, Nazmul Alam <fadedreamz at gmail.com> wrote:

> Hi Peter,
> I think I used make BOARD=msb-430 instead of telosb. May be I mistakenly
> used MC model as board because in my cause the script was different than
> you mentioned.
>
> I will check it and confirm it.
>
> Thanks again for the direction.
>
> On Tue, Jul 5, 2016 at 3:33 AM, Peter Kietzmann <
> peter.kietzmann at haw-hamburg.de> wrote:
>
>> Hi,
>>
>> the TelosB is supported by RIOT, yes. And it does not need an Olimex
>> adapter cause it has a "GoodFET" jtag adapter on board. The script
>> RIOT/dist/tools/goodfet/goodfet.bsl is called by the "make flash" command.
>>
>> Did you try "BOARD=telosb make clean all flash"? It worked for me without
>> any problems.
>>
>> Cheers
>> Peter
>>
>> Am 05.07.2016 um 09:17 schrieb Nazmul Alam:
>>
>>> Hello Peter,
>>> Thanks for quick response.
>>> Yes, The board is TelosB. And AFAI understand the board is supported by
>>> riot-os.
>>>
>>> But I was unable to flash it as it uses mspdebug tool which in turns
>>> uses the Olimex programmer.
>>>
>>> Is it mandatory for the board?
>>> Thanks again.
>>> Regards,
>>>
>>> On Jul 5, 2016 2:55 AM, "Peter Kietzmann"
>>> <peter.kietzmann at haw-hamburg.de <mailto:peter.kietzmann at haw-hamburg.de>>
>>>
>>> wrote:
>>>
>>>     Hi Shovon,
>>>
>>>     we don't have a board "CM5000MSP" in RIOT. Do you mean TelosB? We
>>>     have a couple of MSP430 based boards in RIOT. Some, e.g. MS*B*-430H
>>>     need the Olimex debugger. Some don't, e.g. TelosB. You need to build
>>>     and flash for the correct BOARD and obviously the board must be
>>>     supported by RIOT.
>>>
>>>     Best
>>>     Peter
>>>
>>>     Am 05.07.2016 um 06:40 schrieb Nazmul Alam:
>>>
>>>         Hello,
>>>         I was trying to run an example program (hello-world) on the
>>>         MSP430 based
>>>         board to test out riot-os, but flashing is failing -
>>>         make BOARD=msb-430 flash
>>>         with following error
>>>         usbutil: unable to find a device matching 15ba:0031
>>>
>>>         The device is connected directly to USB port and I believe it is
>>>         using
>>>         FDTI driver (USB-RS232).
>>>         lsusb shows -
>>>         Bus 002 Device 004: ID 0451:8142 Texas Instruments, Inc.
>>>         TUSB8041 4-Port Hub
>>>         Bus 002 Device 003: ID 0451:8142 Texas Instruments, Inc.
>>>         TUSB8041 4-Port Hub
>>>         Bus 001 Device 007: ID 0403:6001 Future Technology Devices
>>>         International, Ltd FT232 USB-Serial (UART) IC
>>>         Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc.
>>>         Bus 004 Device 002: ID 0451:8140 Texas Instruments, Inc.
>>>
>>>         but the make flash is trying to use
>>>         mspdebug -j olimex "prog myihex"
>>>         so I believe the programmer is olimex (google shows JTAG based
>>>         programmer).
>>>
>>>         So, how can I flash riot-os in the device over the FDTI?
>>>
>>>         P/S: I was able to flash contiki os in it over the FDTI driver.
>>>
>>>         Thanks in advance.
>>>         regards,
>>>         Shovon.
>>>
>>>
>>>         _______________________________________________
>>>         users mailing list
>>>         users at riot-os.org <mailto:users at riot-os.org>
>>>         https://lists.riot-os.org/mailman/listinfo/users
>>>
>>>
>>>     --
>>>     Peter Kietzmann
>>>
>>>     Hamburg University of Applied Sciences
>>>     Dept. Informatik, Internet Technologies Group
>>>     Berliner Tor 7, 20099 Hamburg, Germany
>>>     Fon: +49-40-42875-8426 <tel:%2B49-40-42875-8426>
>>>     Web: http://www.haw-hamburg.de/inet
>>>     _______________________________________________
>>>     users mailing list
>>>     users at riot-os.org <mailto:users at riot-os.org>
>>>     https://lists.riot-os.org/mailman/listinfo/users
>>>
>>>
>>>
>>> _______________________________________________
>>> users mailing list
>>> users at riot-os.org
>>> https://lists.riot-os.org/mailman/listinfo/users
>>>
>>>
>> --
>> Peter Kietzmann
>>
>> Hamburg University of Applied Sciences
>> Dept. Informatik, Internet Technologies Group
>> Berliner Tor 7, 20099 Hamburg, Germany
>> Fon: +49-40-42875-8426
>> Web: http://www.haw-hamburg.de/inet
>> _______________________________________________
>> users mailing list
>> users at riot-os.org
>> https://lists.riot-os.org/mailman/listinfo/users
>>
>
>
>
> --
> with best regards,
>        Nazmul Alam Shovon
>
>
> *শুভেচ্ছান্তে,       নাজমুল আলম শোভন*
>
> email : fadedreamz at gmail.com
> blog : http://yourdigitaleffects.blogspot.com
>



-- 
with best regards,
       Nazmul Alam Shovon


*শুভেচ্ছান্তে,       নাজমুল আলম শোভন*

email : fadedreamz at gmail.com
blog : http://yourdigitaleffects.blogspot.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.riot-os.org/pipermail/users/attachments/20160705/5f15294f/attachment.html>


More information about the users mailing list